TRENBuy me a coffee

Tapping

Tap the fretboard with your picking hand's middle finger and pull off to a fretted note: triplet tapping patterns on one string, then a small tapping study that follows the chords Am-F-G-E.

  • 50 → 80 → 100 BPM
  • 30 min
  • Acoustic and electric
Extra · Lesson 3Tapping
Preparing the tab
Fretboard · notes sounding now
Measure 1 / 20

Measure 1 / 20

Fret the high e string at the 5th fret (A) with your index. Tap the 12th fret with your picking hand's middle finger, then lift it with a slight sideways pull: the 5 sounds.

Reading the tab

The T above a note means tapping: the picking hand's finger strikes the fretboard to sound it. P is a pull-off: you go from 12 down to 5 without the pick.

Rhythm

Quarters: tap on 1 and 3, pull-off on 2 and 4. Slow; let every note ring for its full length.

Click a measure to freeze it and look at each note · Shift + click: loop range · Space play/pause · ← → measure · L loop · M metronome · C count-in · + − tempo · Esc resume

All measure notes
  1. Measure 1 / 20

    Fret the high e string at the 5th fret (A) with your index. Tap the 12th fret with your picking hand's middle finger, then lift it with a slight sideways pull: the 5 sounds.

    The T above a note means tapping: the picking hand's finger strikes the fretboard to sound it. P is a pull-off: you go from 12 down to 5 without the pick.

    Quarters: tap on 1 and 3, pull-off on 2 and 4. Slow; let every note ring for its full length.

  2. Measure 2 / 20

    Keep the pick between thumb and index; tap with the middle finger. Aim right behind the fret wire.

    Same numbers, 12 and 5; the only change in this measure is speed.

    Eighths: tap on the beat, pull-off on the '&'. Make both notes equally loud.

  3. Measure 3 / 20

    A third note: hammer on to the 8th fret with your pinky (C). The round: tap 12, pull off to 5, hammer on to 8; all three are notes of Am: E, A, C.

    T, P, H in that order: tap, pull-off, hammer-on. No pick at all, so there are no stroke marks in the tab.

    Triplets: '1 & a'. The tap sits at the start of every beat, on the '1'.

  4. Measure 4 / 20

    Muting: let your fretting index lean lightly on the B and G strings, and rest the edge of your picking hand on the thick strings.

    A repeat of the last measure. Look at your hand instead of the tab: is the tap landing right behind the 12th fret?

    Are the three notes even? The hammer-on tends to come late and weak; bring the pinky down firmly and on time.

  5. Measure 5 / 20

    Now with chords, starting on Am. Keep your picking wrist relaxed and tap with a short, crisp motion.

    The chord name sits above the measure's first note. In this section every measure brings a new chord.

    The bass plays the root twice per measure; your taps on 1 and 3 line up with it.

  6. Measure 6 / 20

    F: the fretting hand stays put (5 and 8); only the tap moves up one fret to 13, an F. The F chord = F, A, C.

    The only difference is the tapped number: 13 instead of 12.

    The chord changes on 1, with the tap. Since the tap is the only note that changes, make it clear on the beat.

  7. Measure 7 / 20

    G: the fretting hand shifts to 7th position (index 7, pinky 10), and the tap goes to 15. The notes are G, B, D.

    All three numbers changed: 15, 7, 10.

    The trick to the shift: while the tapped 15 rings, the fretting hand slides from 5 to 7. Have the index in place when the pull-off comes.

  8. Measure 8 / 20

    E: the fretting hand moves to 4th position (index 4, pinky 7), tap on 12. The notes are E, G#, B.

    The tap is on 12 again, but the notes under it are now 4 and 7.

    End of the section: four rounds of triplets. The next section is in sixteenths.

  9. Measure 9 / 20

    A four-note round: tap 12, pull off to 5, hammer on to 8, pull off to 5. The pinky does the last pull-off, flicking the string slightly sideways.

    T P H P: four notes, and only the first one comes from the picking hand.

    Sixteenths: '1 e & a'. The tap is still at the start of the beat.

  10. Measure 10 / 20

    On F the fretting hand stays at 5 and 8; tap on 13. Keep the tapping finger hovering just above the string, ready for the next beat.

    The 13-5-8-5 pattern four times.

    Count for evenness: 'one e and a, two e and a'. One syllable per note.

  11. Measure 11 / 20

    G: tap 15, fretting hand at 7 and 10. Again, the shift happens while the tap rings.

    15-7-10-7: the tapped 15 is the highest note of the round.

    In sixteenths the shift gets only one sixteenth. If needed, practice measures 10-11 on their own at a slower tempo.

  12. Measure 12 / 20

    On E the fretting hand drops to the 4th fret; tap on 12, the same spot as on Am.

    12-4-7-4 four times.

    End of the section. The next one is triplets again: get ready to switch the count from '1 e & a' to '1 & a'.

  13. Measure 13 / 20

    The study: the tap now alternates between two frets, 12 (E) and 17 (A). The fretting hand stays put.

    The tapped numbers alternate 12 and 17; the fretting-hand notes (5, 8) stay the same.

    Triplets, one round per beat. The melody is in the taps: 12 on 1, 17 on 2.

  14. Measure 14 / 20

    On F the taps are 13 and 17. The 17 (A) is in both chords: it's the third of F.

    17 is the note shared with Am; the only change is 12 becoming 13.

    On wide tap jumps, move your whole hand instead of stretching the finger, so the tap stays on time.

  15. Measure 15 / 20

    G: taps on 15 and 19, fretting hand at 7 and 10. The 19 (B) is high up the neck; look at the spot before you tap.

    The highest number in the study is here: 19.

    Slide from 5 to 7 while the tapped 15 rings; don't miss the first pull-off.

  16. Measure 16 / 20

    E: taps on 12 and 16 (G#), fretting hand at 4 and 7. G# is the chord's third, and it pulls your ear toward Am.

    16 and 4 are exactly an octave apart: both are G#.

    Sixteenths start next measure: switch the count.

  17. Measure 17 / 20

    The same tap melody (12, 17), now in four-note rounds.

    T P H P; the taps alternate 12 and 17.

    Taps on 1, 2, 3 and 4; the three notes in between come from the fretting hand.

  18. Measure 18 / 20

    Listen for cleanliness: with distortion, unplayed strings start buzzing easily. Is the edge of your palm on the thick strings?

    13 and 17 in turn, with 5-8-5 underneath.

    The next measure holds two chords: G and E, two beats each.

  19. Measure 19 / 20

    The chord changes mid-measure: E on beat 3. The fretting hand drops from 7 to 4 while the tapped 12 rings.

    Chord names: G on 1, E on 3.

    Two beats of G, two of E. The shift comes with the tap on beat 3.

  20. Measure 20 / 20

    Ending: two rounds of triplets, then hold the A at the 5th fret with an index-finger vibrato.

    The last note, 5, comes from a pull-off off the 8; the wavy line means vibrato.

    Triplets on 1 and 2, then hold through 3 and 4.

Goal

#Your goal in this lesson
1Tap with your picking hand’s middle finger and pull off to the note held by the fretting hand.
2Play the tap, pull-off, hammer-on pattern on one string evenly, in triplets and in sixteenths.
3Move the tapped note and the fretting hand to the new chord when the chord changes (Am, F, G, E).
4Play the 20-measure study four clean rounds in a row at 80 BPM.

Before you start

#Before you start, you should be able to
1You can play hammer-ons and pull-offs (Hammer-ons and pull-offs).
2You can count triplets and sixteenths.
3You know how to keep unplayed strings quiet with fretting-hand muting and palm muting.
4You know that an arpeggio means playing a chord’s notes one at a time.

If any of these feel shaky, look up the matching concept in the Atlas.

Explanation

Listen first. Play back measures 13-16 of the study. On a single string, without the pick, you hear a fast, flowing arpeggio with wide leaps. Behind that sound is tapping: a finger of the picking hand comes down on the fretboard like a third hand next to the fretting hand.

What’s tapping? You hammer a fret with a picking-hand finger (the tap): the note sounds without the pick. Then you lift the finger with a slight sideways pull (a pull-off), and the lower note held by the fretting hand sounds. Add a hammer-on from the fretting hand, and one tap gives you three notes. Everything in this lesson happens on the high e string: for Am, tap 12 (E), pull off to 5 (A), hammer on to 8 (C). There are seven frets between 12 and 5, a stretch no single hand can reach, but easy with tapping.

Which finger? In this lesson, the middle finger: the pick stays between thumb and index, ready as soon as the tapping is over. Some players tap with the index and tuck the pick into the palm; both work, and here we use the middle finger.

How to tap and pull off

  • Strike with the fingertip right behind the fret wire, with a short, firm motion. A soft tap gives a thin note.
  • Don’t lift the finger straight up: release it slightly sideways, dragging the string a little. Lift straight up and the lower note won’t sound. If your finger slips off the edge of the neck on the high e string, pulling upward (toward the thick strings) is more comfortable.
  • The fretting index is already waiting at the 5th fret before the tap; the pull-off lands on it. The pinky hammers on to 8, and the tap comes again.

Muting. With distortion, unplayed strings start buzzing easily. While your fretting index holds the high e string, let its underside touch the B and G strings lightly; rest the edge of your picking hand on the thick strings near the bridge.

In the tab. A tapped note has a T above it. P means pull-off, H means hammer-on. There’s no pick in this lesson, so there are no stroke marks either.

Tapping with chords. The pattern never changes: tap, pull-off, hammer-on. When the chord changes, only the numbers move, and all three notes belong to the chord:

Chord Tap Fretting hand (index · pinky) Notes
Am 12 (12 and 17 in the study) 5 · 8 E · A · C (17 = high A)
F 13 (13 and 17 in the study) 5 · 8 F · A · C
G 15 (15 and 19 in the study) 7 · 10 G · B · D
E 12 (12 and 16 in the study) 4 · 7 E · G# · B

Going from Am to F, the fretting hand doesn’t move at all; only the tap goes up a fret. On G and E the fretting hand shifts: make the shift while the tap rings, so the index is in place when the pull-off comes.

Measures Content
1-4 Am: tap and pull-off (quarters, eighths), then tap, pull-off, hammer-on (triplets)
5-8 Am F G E, triplets
9-12 Am F G E, sixteenths: tap, pull-off, hammer-on, pull-off
13-20 study: the tap alternates between two notes; triplets, sixteenths, then an ending on Am

The bass plays each chord’s root; the drums keep a half-time feel, with quarter-note hi-hats under the triplets.

Exercises

MetronomeRepeats / timePass criterion
1. Tap and open string only

No metronome. Leave the fretting hand out: on the high e string, tap 12 and pull off to the open string. Then hold the 5th fret with your fretting hand and do the same.

—Time: 3 minutes.the tapped note and the pull-off note come out equally loud.
2. The pattern on one string (measures 1-4)

Loop measures 1-4. Feel the step from quarters to eighths, then to triplets.

50 → 80 BPM, in steps of 5.4 rounds at each tempo.the three triplet notes are even and the tap sits right at the start of every beat.
3. With chords, triplets (measures 5-8)

Loop measures 5-8. Make the shifts while the tap rings.

50 → 80 BPM, in steps of 5.4 rounds at each tempo.there are no gaps or extra notes at the chord changes.
4. Sixteenths (measures 9-12)

Loop measures 9-12. Switch the count to “1 e & a”.

50 → 80 BPM, in steps of 5.4 rounds at each tempo.the four notes are even and the second pull-off (pinky to index) doesn’t disappear.
5. Full study and stretch goal

Play all 20 measures.

50 → 80 → 100 BPM.4 clean rounds in a row at 80 BPM; if you’re ready, 2 rounds at 100 BPM.four clean rounds at 80 BPM. 100 BPM is a stretch goal; if the buzzing grows, stay at 80.
6. Your own tapping melody (creative)

Mute the guitar track and loop measures 13-16. Keep the fretting-hand pattern, but choose the tapped notes yourself: for each chord, find one of its notes (from the table) on the high e string and tap it.

——you can play your own tap melody for two rounds without missing a chord change.

Common mistakes

SymptomCauseFix
The tapped note is thinthe tap is soft or far from the fretstrike firmly with the fingertip, right behind the fret wire.
The pull-off note doesn’t sound after the tapthe finger lifts straight updrag the string slightly sideways as you let go.
Other strings buzz or ringno mutinglet the fretting index cover the lower strings and the edge of your picking hand cover the thick ones.
The hammer-on is weak or latethe pinky comes down slowlybring it down firmly and on time; practice that note on its own at a slow tempo.
The pull-off misses at a chord changethe fretting hand shifts too latemake the shift while the tap rings.
The triplets turn into sixteenths or speed upyou aren’t counting along insidecount “1 & a” out loud, with the tap always on “1”.
You hit the wrong fret on the far taps (17, 19)only the finger reachesmove your whole hand and look at the spot before you tap.

Checklist

I can do itItem
I can tap with my middle finger and pull off to the note held by the fretting hand.
I can play the tap, pull-off, hammer-on pattern evenly in triplets and sixteenths.
I can keep the unplayed strings quiet with both hands.
When the chord changes, I can move the tapped note and the fretting hand on time.
I can play the whole study four clean rounds in a row at 80 BPM.

The lessons you mark and the concepts you see are stored only in this browser; no account. Your path